Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers
Hollandstone Series Unilock Pavers

Hollandstone Series Unilock Pavers

U44
Vendor
Unilock
Regular price
$3.50
Sale price
$3.50
Quantity must be 1 or more

Hollandstone Series

Sold By The Sq Ft

Hollandstone Classic is available in 5 Colors: Terra Cotta, Rustic Red, Sandstone, Beechwood and St Clair

Hollandstone Premier is available in 3 Colors:  Granite, Charcoal, and Fossil

SHAPE AND SIZE

img
STANDARD
3 7/8" x 7 7/8" x 2 3/8"

106.40 Sq Ft Per Pallet
11.80 Sq Ft Per Layer
9 Layers Per Pallet
1.50 Linear Ft Per Sq Ft
159.45 Linear Ft Per Pallet - Soldier
4.58 Units Per Sq Ft
486 Units Per Pallet
54 Units Per Layer
323.79 Lbs Per Layer
2914.13 Lbs Per Pallet
6 Lbs Per Unit
17.72 Linear Ft Per Layer - Soldier
.33 Linear Ft Per Unit - Soldier
.22 Sq Ft Per Unit
3.0 Linear Ft Per Sq Ft - Sailor
318.90 Linear Ft Per Pallet - Sailor
35.43 Linear Ft Per Layer - Sailor

RECOMMENDED BASE STABILIZATION – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.

STANDARD BASE – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

STANDARD BEDDING COURSE – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

ALTERNATIVE PERMEABLE BASE – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

ALTERNATIVE PERMEABLE BEDDING COURSE – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

SPECIAL NOTE: CONCRETE DIRECT OVERLAY – In some areas of the country and in some applications pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:

  1. Concrete integrity – concrete must be in good condition, and not crumbling
  2. Drainage slope – concrete below must be sloped away from all buildings and structures
  3. Drainage holes – In lowest areas of the concrete, drill 1” holes in concrete (on 12” centers) and fill holes with ¼” chip (ASTM No. 8)
  4. Base drainage - the area below the concrete must not be subject to frost movement
  5. Surface - surface must be totally smooth and flat equivalent to the desired finished surface
  6. Waterproofing - may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface.
  7. Jointing Sand - Use an impervious polymeric sand when installing over concrete